• 
  
  
  
• Overview Specification Fit Model Compatible Codes Warranty

  ---

This Canon NB-1LH battery is made specifically for your canon digital camera and to meet or exceed the original manufacturer specifications. Our digital camera battery for canon nb-1lh provide a full 1 year warranty and 30 days refund! Why go somewhere else and pay more? Get the quality and reliability that you need at the fraction of the OEM cost.

• Our Price:
• Quantity:
• Nb-1lh battery in other country

Buy this item with canon nb-1lh digital camera battery and nb-1lh digital camera battery charger together you can (save more £1!)

• 
• +
• 
• =

1. Keep canon nb-1lh battery in a cool and dry storage area. Refrigeration is recommended but freezers should be avoided. When refrigerated, the nb-1lh battery should be placed in a plastic bag to protect against condensation.
2. Do not fully charge lithium and nickel-based batteries before storage. Keep them partially charged and apply a full charge before use. Store lithium-ion at about 40% state-of-charge (3.75-3.80V/cell open terminal). Lead-acid batteries must be stored fully charged.
3. Do not store lithium-ion fully depleted. If empty, charge for about 30 minutes before storage. Self-discharge on a depleted nb-1lh camera battery may cause the protection circuit to trip, preventing a recharge.
4. Do not stockpile li-ion batteries; avoid buying dated stock, even if offered at a reduced price. Observe the manufacturing date, if available.
5. Never leave a nickel-based battery sitting on a charger for more than a few days. Prolonged trickle charge causes crystalline formation (memory).
6. Always store a lead acid battery in full-charge condition. Observe the open terminal voltage and recharge the nb-1lh digital camera battery every 6 months or as recommended by the manufacturer.

• The secret of digital camera battery quick testing lies, to a large extent, in understanding how the batteries is being loaded. Digital Camera Batteries loads vary from short current bursts for a mobile phone using the GSM protocol, to long and fluctuating loads on notebook computers, and to intermittent heavy loads for power tools.
• Because of these differences in loads, a battery for a digital mobile phone should be tested primarily for low impedance to assure a clean delivery of the current bursts, whereas a battery for a laptop should be examined mainly for the bulk in energy reserve. Ultra-low impedance is of less importance here. A battery for a power tool, on the other hand, needs both ¡ª low impedance and good power reserve.
• Some quick testers simulate the equipment load and observe the voltage signature of the digital camera battery under these conditions. The readings are compared with the reference settings, which are stored in the tester. The resulting discrepancies are calculated against the anticipated or ideal settings and displayed as the SoH readings.
• The first step in obtaining quick test readings is measuring the battery¡¯s internal resistance, often referred to as impedance. Internal resistance measurements take only a few seconds to complete and provide a reasonably accurate indication of the battery¡¯s condition, especially if a reference reading from a good canon nb-1lh digital camera batteries is available for comparison.

• Do not disassemble.
• Do not leave on charge for extended periods.
• Do not short-circuit. A short-circuit may cause severe damage to the canon nb-1lh battery.
• Do not drop, hit or otherwise abuse the battery as this may result in the exposure of the cell contents, which are corrosive.
• Do not expose the nb-1lh battery to moisture or rain.
• Keep battery away from fire or other sources of extreme heat. Do not incinerate. Exposure of battery to extreme heat may result in an explosion.